•  High combined data rates of 1167 Mbps (AC 867 Mbps + N 300 Mbps) over the air

• Beamforming technology Bandsteering for efficient traffic management

• Support 8 units to form a  self-configuring cluster  to enable effortless provisioning

• Up to 32 virtual access points (VAP) may be created from a single access point

• WMM Quality of  Service (QOS) makes an ideal AP for audio, video, and voice application.

• Up to 16 SSIDs  per frequency band and 32 SSIDs per AP

• 802.3at Power Over Gigabit Ethernet enables installation at hard to reach locations

• Support Dynamic Auto-Channel Selection in Standalone mode

• Support Load balancing to optimise high network traffic volume and redundancy

• Automatic RF Adjustment and Auto Power management in densely AP deployment

• Standard Compliance
• Compliant with IEEE 802.3z GigabitStandard
• Self-contained in Standard Small Form Pluggable (SFP) Package
• Simplex LC Connector
• Interoperable with D-Link Switches
• Long-Distance Fiber Application
• Maximum 10 km Fiber Cable Distance (DEM-330T/330R)
• Maximum 40 km Fiber Cable Distance (DEM-331T/331R)
• Use Single-mode Fiber Cable
• Use Single Fiber Strand for Transmission/Reception
• Optimal Bidirectional Operation
• Gigabit Operation
• Bidirectional Operation Using Separate Transmit and Receive Wavelengths
• Versatile, Sturdy Devices
• Single 3.3V Power Supply
• Hot Swappable
• Durable Metal Enclosure

Bidirectional SFP Transceiver 1 Port 10GBASE-LR (without DDM) for singlemode fiber optic cable, power supply 3.3V (up to 20km), WDM (TX: 1270nm, RX: 1330nm)

• IEEE 802.11 AC wireless standard with up to 1200 Mbps Speed

• Concurrent Dual Band operation for Increase Network Capacity

• Gigabit LAN with 802.3af Power over Ethernet support

• Automatic Network Traffic Prioritization with WMM QoS Feature

• Support Up to 26 dBm high power design

• Band Steering and Bandwidth Optimization support

• Multiple operating modes - AP, (WDS) with AP,WDS/Bridge & Client

• Support AP Array and Central WiFi Manager (CWM)

• Network Access Protection (NAP)

High performance, flexibility, fault tolerance, and advanced software features for SMBs, SMEs, large enterprises, and ISPs.

• 20 x SFP ports • 4 x Combo 10/100/1000BASE-T/SFP ports • 4 x 10G SFP+ ports • 6 kV surge protection on all RJ-45 access ports • Switch Resource Management (SRM) for flexible management of system resources • Redundant Power Supply (RPS) support • MPLS L2VPM/L3 VPN support • Full L3 routing protocol support including OSPF, BGP, and ISIS for IPv4/IPv6 • SDN-enabled switch, compatible with Openflow 1.3

• 1000Base-SX port (IEEE 802.3z standard)
• Duplex LC connector
• Full duplex operation
• 802.3x flow control support
• Fibre type: 50 um or 62.5 um multi-mode fibre (up to 550 m.)
• Wavelenght: 850 nm.
• Power support: 3.3 V.
• Hot pluggable
• Class 1 laser product (complies with EN60825-1)
• TTL signal detect indicator
• Metal enclosure for lower EMI

• Four Gigabit Ethernet port with one hard Drive Extension Slot • Manage up to 64 wireless APs and upgradable to 256 APs per controller • Manage up to a maximum of 1024 APs in a Controller cluster • Self-healing and self-optimizing technology combined with 4+4 wireless controller redundancy and RF scanning • Concurrent Captive Portal for authentication users in wired or wireless deployment • Centralized RF,Security , Firewall, VPN, Content Filtering and Policy Management • Support 802.1x port-based access control and guest VLAN • Wireless Intrusion Detection & Prevention System (WIDS)

• Small Form Factor Pluggable (SFP) Multi-Source Agreement (MSA) Specification Compliant
• IEEE 802.3u 100BASE-FX Standard
• 15 km Single-Mode Fiber
• Hot-Swappable
• FDA, CDRH, TUV Laser Eye Safety Certified

• Standard Compliance
• Compliant with IEEE 802.3z Gigabit Standard
• Self-contained in Standard Small Form Pluggable (SFP) Package
• Simplex LC Connector
• Interoperable with D-Link Switches
• Long-Distance Fiber Application
• Maximum 10 km Fiber Cable Distance (DEM-330T/330R)
• Maximum 40 km Fiber Cable Distance (DEM-331T/331R)
• Use Single-mode Fiber Cable
• Use Single Fiber Strand for Transmission/Reception
• Optimal Bidirectional Operation
• Gigabit Operation
• Bidirectional Operation Using Separate Transmit and Receive Wavelengths
• Versatile, Sturdy Devices
• Single 3.3V Power Supply
• Hot Swappable
• Durable Metal Enclosure

• 48 Port 10/100 Base-T POE Switch with 2 x 10/100/1000 Base-T Ports

• Support 2 x 10/100/1000 Base-T/SFP Combo Slots

• IEEE 802.1Q Virtual LAN (VLAN)

• Support  IGMP and MLD Snooping

• Support Auto Surveillance and Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

The DMC-700SC by D-Link® is a media converter designed to connect 1000BASE-SX fiber to 1000Base-T copper media or vice versa.

• 24 Ports 10/100/1000 Base-T PoE + 2 SFP Ports + 2 x 10G SFP+ Slots

• Support IEEE 802.3af (PoE) and 802.3at (PoE+) Standard

• Physical Stacking via two 10 Gigabit SFP+ Ports with stacking up to six device

• Virtual stacking of up to 32 units via D-link’s Single IP Management (SIM)

• Support G.8032 ERPS to achieve high reliability  and network stability

• Auto Surveillance (ASV), Auto Voice VLAN for VoIP and Video Surveillance deployments.

• 802.1X port based authentication, for authentication through external RADIUS servers

• IEEE 802.3az Energy Efficient Ethernet with  D-Link Green 3.0 power-saving features

• Loopback Detection automatically disables port or VLAN when a loop is detected

• Support Layer 2 Features – IGMP & MLD Snooping, 802.3x  Flow control  and LLDP

• 10GBASE-LRM Small Form-factor Pluggable Plus (SFP+).
• Standards based 10-Gigabit Ethernet (10GBASE-LRM).
• 10 Gbit/sec line speed.
• Operating distance up to 300m on OS1 fibre or 220m on OM2 fibre.
• Transmitter wavelength 1310nm.
• Industry-standard LC duplex connector.
• Singlemode and Multimode Fibre (SMF/MMF).
• Digital Optical Monitoring (DOM).

Bidirectional SFP Transceiver 1 Port 10GBASE-LR (without DDM) for singlemode fiber optic cable, power supply 3.3V (up to 20km), WDM (TX: 1330nm, RX: 1270nm)

• Full HD 1080p, 30 fps
• 3-Megapixel sensor, supporting resolution up to 2048 x 1536
• Day and night with ICR filter and IR LED
• 10m night vision
• Wide Dynamic Range
• 3D Noise Reduction
• Supports Power over Ethernet

• 24 Port 10/100 Base-T PoE Switch with 2 x 10/100/1000 Base-T/SFP Combo Ports

• Support IEEE 802.3af  and 802.3at PoE Standard

• IEEE 802.1Q Virtual LAN (VLAN)

•  Support Auto Surveillance VLAN (ASV), Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

• - Supports cascade chaining for control of up to 4096 PCs
• - Features on-screen display(OSD)
• - Supports up to 2048 x 1536 monitor resolution

• Cost-effective solution for 10G fiber connection
• Small form factor, allowing higher port densities for 10G connections
• Lower power dissipation
• Hot-pluggable
• Compliant with Ethernet 802.3ae
• Compliant with fiber MSA (Multiple Source Agreement)

• Standard Compliance
• Compliant with IEEE 802.3z GigabitStandard
• Self-contained in Standard Small Form Pluggable (SFP) Package
• Simplex LC Connector
• Interoperable with D-Link Switches
• Long-Distance Fiber Application
• Maximum 10 km Fiber Cable Distance (DEM-330T/330R)
• Maximum 40 km Fiber Cable Distance (DEM-331T/331R)
• Use Single-mode Fiber Cable
• Use Single Fiber Strand for Transmission/Reception
• Optimal Bidirectional Operation
• Gigabit Operation
• Bidirectional Operation Using Separate Transmit and Receive Wavelengths
• Versatile, Sturdy Devices
• Single 3.3V Power Supply
• Hot Swappable
• Durable Metal Enclosure

• 24 Port 10/100/1000 Base-T with 2 Gigabit SFP Ports • Equipped with 802.3az Energy Efficient Ethernet (EEE) Complaint • Support IEEE 802.1Q VLAN traffic segregation • Auto Surveillance VLAN for easy integration with IP-based surveillance systems • Loopback detection (LBD) and broadcast storm control to avoid network downtime • Quality of Service (QOS) and bandwidth control to ensure smooth operation • Cable diagnostics function to help troubleshooting wiring problem • Support Web-based GUI, Smart Console, Network Assistance Utility"

• 10BASE-T/100BASE-TX copper port
• 100BASE-FX fiber port
• SC connectors
• Multimode fiber

   

• 20 Ports 10/100/1000 Base-T PoE  with  4 Combo 10/100/1000 Base-T POE /SFP ports

• Support Optional Redundant Power Supply and Smart Fans

•  Support IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) with 370W Power Budget

• Support  ITU-T G.8032 Ethernet Ring Protection Switching (ERPS),

• Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM)

• Support 802.1 ag Connectivity Fault Management (CFM) and  802.3 ah Ethernet OAM

• Support 802.1 V protocol VLAN, ISM VLAN,  Double VLAN (Q-in-Q) and Selective Q-in-Q

• D-Link Single IP Management (SIM) simplifies and speeds up management

• Built-in 2 x 10G CX4 Stacking  Ports, Stackable up to 6 Units, support 40G Stacking bandwidth

• Comprehensive Security – Multi-layer and Packet Content (ACL), (IMPB) with DHCP Snooping

• Identity Driven Network Policies such as 802.1X,  WAC, and MAC-based Access Control (MAC)

SFP Transceiver 1 Port 10GBASE-LRM (with DDM) for multimode fiber optic cable, power supply 3.3V (up to 200m)

- 1000BASE-LX port (IEEE 802.3z standard) - Duplex LC connector - Full duplex operation - 802.3x flow control support - Fiber type: 9um single-mode fiber up to 10 km - Wave length: 1310nm - Power support: 3.3V - Power budget: 10.5dB - Hot pluggable - Class 1 laser product complies with EN 60825-1 - TTL signal detect indicator - Metal enclosure for lower EMI