• Full HD 1080p, 30 fps
• 3-Megapixel sensor, supporting resolution up to 2048 x 1536
• Day and night with ICR filter and IR LED
• 10m night vision
• Wide Dynamic Range
• 3D Noise Reduction
• Supports Power over Ethernet

Enjoy High-performance Wireless Connectivity - Harness the power of IEEE 802.11ac Wave 2 wireless and experience wireless speeds of up to 1300 Mbps, perfect for high-demand business applications MU-MIMO with Beamforming - Dramatically improves the wireless range and performance as well as allowing multiple devices to connect simultaneously to the wireless network Multiple Operational Modes -Flexible options allows the DAP-2610 to function as an access point, a Wireless Distribution System (WDS), a WDS with access point, or a wireless client

-Precision Monitoring

-Weatherproof and Vandal-proof for Outdoor Applications

• 8 Port 10/100 Base-T POE Switch

• Support IEEE 802.3af POE Standard

• IEEE 802.1Q Virtual LAN (VLAN)

• Support Auto Surveillance and Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

•  Up to 300 Mbps Wireless Speed Performance on IEEE 802.11n Single Band

•  Support self-configuring cluster  to enable effortless provisioning

•  Up to 16 virtual access points (VAP) may be created from a single access point

•  Up to 16 SSIDs  to assign different access privileges to different groups

•  802.3af Power Over Ethernet enables installation at hard to reach locations

•  Support Dynamic Auto-Channel Selection in Standalone Mode

•  Support Load balancing to optimise high network traffic volume and redundancy

•  Automatic RF Adjustment and management in densely AP deployment

• 4 x 10/100/1000 LAN ports
• 2 x 10/100/1000 WAN port
• Supports up to 95 VPN Tunnels (total)
• 950 Mbps Firewall Throughput
• 50,000 Concurrent Sessions
• 600 Firewall Policies
• Limited Lifetime Warranty

- Convert an SFP Fiber Interface into a 1000Base-T Copper Uplink

- Hot Pluggable

- IEEE 802.3ab 1000Base-T Compliant

- Up to 1.25Gbps Bi-directional Data when Combined with an Additional DGS-712

• Blazing performance  reaching up to 1 Gbps of network throughput

• 2.4 GHz 802.11n supports up to 300 Mbps and 5 GHz 802.11ac supports up to 867 Mbps

• IP 67-compliant housing to withstand very harsh weather conditions

• Up to 32 virtual access points may be created using a single access point

• Support up to 16 SSIDs  per frequency band and 32 SSIDs per AP

• Automatic load-balancing between linked Access Points

• Flexible Wi-Fi QoS schemes, allowing for controlled and balanced access

• Supports 802.3at Power over  Gigabit Ethernet to be installed in remote locations

• Support Dynamic Auto-Channel Selection, Automatic RF Adjustment and Auto Power management

Convenience • Two attached USB and audio cables to connect two PCs • Remote toggle button • Hotkey commands Input • Two USB ports for one USB mouse and USB keyboard • Microsoft IntelliMouse support Video • VGA connector • Supports multiple monitor resolutions Audio • Audio port • Stereo support

ƒƒ• Wireless performance of up to 300 Mbps on IEEE 802.11n  on Single Band

• Support self-configuring cluster  to enable effortless provisioning

• Up to 16 virtual access points (VAP) may be created from a single Access Point

ƒƒ• Automatic load-balancing among neighboring Access Points

• Up to 16 SSIDs  to assign different access privileges to different groups

• ƒƒƒƒFacilitate scaling up of network to  support hundreds of Access Points

• Support Load balancing to optimise high network traffic volume and redundancy

• Automatic RF Adjustment and management in densely AP deployment

• 1000Base-LX port (IEEE 802.3z standard)
• Duplex LC connector
• Very low jitter
• Full duplex operation
• 802.3x flow control support
• Fibre type: 9/125 um single-mode fibre (up to 80 km.)
• Wavelength: 1550 nm.
• Power support: 3.3 V.
• Power budget: 22dB
• Low power dissipation <700mW
• Hot pluggable
• Class 1 laser product (complies with EN60825-1)
• TTL signal detect indicator
• Metal enclosure for lower EMI

• 20 Ports 10/100/1000 Base-T PoE  with  4 Combo 10/100/1000 Base-T POE /SFP ports

• Support Optional Redundant Power Supply and Smart Fans

•  Support IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) with 370W Power Budget

• Support  ITU-T G.8032 Ethernet Ring Protection Switching (ERPS),

• Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM)

• Support 802.1 ag Connectivity Fault Management (CFM) and  802.3 ah Ethernet OAM

• Support 802.1 V protocol VLAN, ISM VLAN,  Double VLAN (Q-in-Q) and Selective Q-in-Q

• D-Link Single IP Management (SIM) simplifies and speeds up management

• Built-in 2 x 10G CX4 Stacking  Ports, Stackable up to 6 Units, support 40G Stacking bandwidth

• Comprehensive Security – Multi-layer and Packet Content (ACL), (IMPB) with DHCP Snooping

• Identity Driven Network Policies such as 802.1X,  WAC, and MAC-based Access Control (MAC)

• 48 Port 10/100 Base-T POE Switch with 2 x 10/100/1000 Base-T Ports

• Support 2 x 10/100/1000 Base-T/SFP Combo Slots

• IEEE 802.1Q Virtual LAN (VLAN)

• Support  IGMP and MLD Snooping

• Support Auto Surveillance and Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

• 10BASE-T/100BASE-TX copper port
• 100BASE-FX fiber port
• SC connectors
• Multimode fiber

• 1000Base-LX port (IEEE 802.3z standard)
• Duplex LC connector
• Very low jitter
• Full duplex operation
• 802.3x flow control support
• Fibre type: 9/125 um single-mode fibre (up to 50 km.)
• Wavelenght: 1310 nm.
• Power support: 3.3 V.
• Power budget: 22 dB
• Hot pluggable
• Class 1 laser product (complies with EN60825-1)
• TTL signal detect indicator
• Metal enclosure for lower EMI

High performance, flexibility, fault tolerance, and advanced software features for SMBs, SMEs, large enterprises, and ISPs.

• 20 x SFP ports • 4 x Combo 10/100/1000BASE-T/SFP ports • 4 x 10G SFP+ ports • 6 kV surge protection on all RJ-45 access ports • Switch Resource Management (SRM) for flexible management of system resources • Redundant Power Supply (RPS) support • MPLS L2VPM/L3 VPN support • Full L3 routing protocol support including OSPF, BGP, and ISIS for IPv4/IPv6 • SDN-enabled switch, compatible with Openflow 1.3