• 48 Port 10/100 Base-T POE Switch with 2 x 10/100/1000 Base-T Ports

• Support 2 x 10/100/1000 Base-T/SFP Combo Slots

• IEEE 802.1Q Virtual LAN (VLAN)

• Support  IGMP and MLD Snooping

• Support Auto Surveillance and Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

High-performance switch delivering wire-speed 10-Gigabit switching, routing, and ultra-low latency.

• 20 x 10GBASE-T ports • 4 x 10GBASE-T/SFP+ Combo ports • Physical stacking with up to 4 devices per stack • Layer 2+ static routing / RIPv1/v2/ng • Optional Layer 3 dynamic routing / OSPF • Data Center Bridging (DCB) features • Hot-swappable power supplies and fan modules

•  High combined data rates of 1167 Mbps (AC 867 Mbps + N 300 Mbps) over the air

• Beamforming technology Bandsteering for efficient traffic management

• Support 8 units to form a  self-configuring cluster  to enable effortless provisioning

• Up to 32 virtual access points (VAP) may be created from a single access point

• WMM Quality of  Service (QOS) makes an ideal AP for audio, video, and voice application.

• Up to 16 SSIDs  per frequency band and 32 SSIDs per AP

• 802.3at Power Over Gigabit Ethernet enables installation at hard to reach locations

• Support Dynamic Auto-Channel Selection in Standalone mode

• Support Load balancing to optimise high network traffic volume and redundancy

• Automatic RF Adjustment and Auto Power management in densely AP deployment

• 24 Port 10/100 Base-T Switch with 2 x 10/100/1000 Base-T/SFP Combo Ports

• IEEE 802.1Q Virtual LAN (VLAN)

• Support Auto Surveillance VLAN (ASV), Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS server

• 8 Port 10/100 Base-T POE Switch

• Support IEEE 802.3af POE Standard

• IEEE 802.1Q Virtual LAN (VLAN)

• Support Auto Surveillance and Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

High performance, flexibility, fault tolerance, and advanced software features for SMBs, SMEs, large enterprises, and ISPs.

• 20 x SFP ports • 4 x Combo 10/100/1000BASE-T/SFP ports • 4 x 10G SFP+ ports • 6 kV surge protection on all RJ-45 access ports • Switch Resource Management (SRM) for flexible management of system resources • Redundant Power Supply (RPS) support • MPLS L2VPM/L3 VPN support • Full L3 routing protocol support including OSPF, BGP, and ISIS for IPv4/IPv6 • SDN-enabled switch, compatible with Openflow 1.3

• 1000Base-SX port (IEEE 802.3z standard)
• Duplex LC connector
• Full duplex operation
• 802.3x flow control support
• Fibre type: 50 um or 62.5 um multi-mode fibre (up to 550 m.)
• Wavelenght: 850 nm.
• Power support: 3.3 V.
• Hot pluggable
• Class 1 laser product (complies with EN60825-1)
• TTL signal detect indicator
• Metal enclosure for lower EMI

• Four Gigabit Ethernet port with Two  Optional Ports for WAN / DMZ

• Manage up to 6 wireless APs and upgradable to 24 APs per controller

• Control up to 24 wireless APs and  maximum 96 APs  in Controller  cluster

• Concurrent Captive Portal for authentication users in wired or wireless deployment

• Centralized RF,Security , Firewall, VPN, Content Filtering  and Policy Management

• Support 802.1x port-based access control and guest VLAN

• Wireless Intrusion Detection & Prevention System (WIDS)

• Small Form Factor Pluggable (SFP) Multi-Source Agreement (MSA) Specification Compliant
• IEEE 802.3u 100BASE-FX Standard
• 15 km Single-Mode Fiber
• Hot-Swappable
• FDA, CDRH, TUV Laser Eye Safety Certified

-Precision Monitoring

-Weatherproof and Vandal-proof for Outdoor Applications

Enjoy High-performance Wireless Connectivity - Harness the power of IEEE 802.11ac Wave 2 wireless and experience wireless speeds of up to 1300 Mbps, perfect for high-demand business applications MU-MIMO with Beamforming - Dramatically improves the wireless range and performance as well as allowing multiple devices to connect simultaneously to the wireless network Multiple Operational Modes -Flexible options allows the DAP-2610 to function as an access point, a Wireless Distribution System (WDS), a WDS with access point, or a wireless client

• 20 Ports 10/100/1000 Base-T PoE  with  4 Combo 10/100/1000 Base-T POE /SFP ports

• Support Optional Redundant Power Supply and Smart Fans

•  Support IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) with 370W Power Budget

• Support  ITU-T G.8032 Ethernet Ring Protection Switching (ERPS),

• Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM)

• Support 802.1 ag Connectivity Fault Management (CFM) and  802.3 ah Ethernet OAM

• Support 802.1 V protocol VLAN, ISM VLAN,  Double VLAN (Q-in-Q) and Selective Q-in-Q

• D-Link Single IP Management (SIM) simplifies and speeds up management

• Built-in 2 x 10G CX4 Stacking  Ports, Stackable up to 6 Units, support 40G Stacking bandwidth

• Comprehensive Security – Multi-layer and Packet Content (ACL), (IMPB) with DHCP Snooping

• Identity Driven Network Policies such as 802.1X,  WAC, and MAC-based Access Control (MAC)

• • High Performance PoE
• • Extend Your Network
• • Quick and Easy Installation

•  Up to 300 Mbps Wireless Speed Performance in either the 2.4 GHz or 5 GHz Band

•  2x2 MIMO embedded antenna with 4 external antenna connectors

•  Support self-configuring cluster  to enable effortless provisioning

•  Up to 32 virtual access points (VAP) may be created from a single access point

•  Wi-Fi Multimedia™ Quality of  Service makes an ideal AP for audio, video, and voice application.

•  Up to 16 SSIDs  per frequency band and 32 SSIDs per AP

•  802.3af Power Over Ethernet enables installation at hard to reach locations

•  Support Dynamic Auto-Channel Selection in Standalone Mode

•  Support Load balancing to optimise high network traffic volume and redundancy

•  Automatic RF Adjustment and management in densely AP deployment

• - Supports cascade chaining for control of up to 4096 PCs
• - Features on-screen display(OSD)
• - Supports up to 2048 x 1536 monitor resolution

• Full HD 1080p, 30 fps
• 3-Megapixel sensor, supporting resolution up to 2048 x 1536
• Day and night with ICR filter and IR LED
• 10m night vision
• Wide Dynamic Range
• 3D Noise Reduction
• Supports Power over Ethernet